1. Scope范围

This document specifies the general quality requirements for “Sleeping Bag” and other similar products. It is used as a general guideline for inspection if clients have not defined their requirement.

此文件为针对箱包及类似产品验货的通用标准。如果客户没有特别的要求，在此定为通用的验货指南

2. Inspection Criteria of Product / Package 产品/包装验货标准 ²

Product: 产品

·Must be without any unsafe defect for using;

不允许有在实际使用中任何对使用者造成伤害的缺陷；

·Should be free of damaged, broken, scratch, crackle etc. Cosmetic / Aesthetics defect;

不应有任何损坏，破碎，擦伤，或碎裂等外观缺陷；

·Must be conform to the shipping market legal regulation / client’s requirement;

必须符合销往国当地的法规以及客户的要求；

²

·The construction, appearance, cosmetics and material of all units should comply with client’s requirement / approved samples;

产品的结构，外观，材料等必须符合客户的要求或与样品保持一致；

·All units should have full function complying with client’s requirement / approved samples; 产品功能必须符合客户的要求或与样品保持一致；

·The marking / label on unit should be legal and clear.

产品上的标记/标签必须符合法规要求且清晰明确。

Package: 包装 ²

·All units will be adequately packaged, and constructed from suitably robust materials, such that it arrives in store in a merchantable condition;

产品要有足够强度的材料构成的充分包装，使得货物以可销售的状态到达目的仓库； ²

·The packaging material can protect the goods from damage during transportation;

在运输过程中，包装材料能防止货物受损； ²

·The shipping mark, bar code, label (such as price label), should conform to client’s spec. and/or approved samples;

箱麦，条形码，标签（例如：价格标签）应符合客户的要求或与样品保持一致； ²

·The package should comply to client’s requirement / approved samples;

包装必须符合客户的要求或与样品保持一致； ²

·Text of illustration, instruction, label and warning statement etc. must be clearly printed in user’s language;

图解，说明书，标签，警告声明等应清晰地印有使用者语言； ²

·The illustration and instruction on the packaging must conform to the product and its actual performance.

包装上的图解和说明书必须与实际产品及其功能保持一致； ²

·The method and material of pallet/crate etc. should be approved by client.

栈板/板条箱包装的材料及方式必须经客户批准

3. Inspection Plan & Defects classification

检验计划及缺陷分类 Ø

Sampling procedure & Defects Definition, please refer to SHOP-HI001 General Inspection Operation Procedure

抽样程序以及缺陷定义，详见SHOP-HI001 通用检查程序 – 终随机检查。 Ø

Acceptable Quality Limit:

可接受的质量限 ²

Critical 0 Non-conformity is not allowed ²

AQL 1.5 For Major Non-Conformity ²

AQL 4.0 For Minor Non-Conformity

. Finger prints on mirror surface 镜面指印 X Dust attached on mirror surface 镜面锈迹 (脏污纤维附在织物表面) X X Loose fibers attached on mirror surface 镜面飞花 (松散纤维附在织物表面) X Appearance Color shade variation between two parts 色差 X X Color off tone 脱色 X Creases mark 皱痕 X Wrinkle mark 起皱 X

Item code

Details详细说明

Sample size & Defects Classification 抽样数量及缺陷分类

Critical 致命

Major 严重

Minor 轻微

１

Packaging Check 包装检查

At least the square root of the total number of cartons or defined by client, and checks all cartons/pallets/crates that were selected for sampling. 至少是总